Power House Installation: Week One

Blogger: Karen Whitting, Creative Programmes

Construction of the Power House exhibition at the Royal Armouries in the Tower of London began last week. Preparing the gallery for the installation has involved ripping out the old displays, which in an old building can be problematic if unanticipated issues are found.

Often all the pre-planning and preparation done prior to installation can be overturned in an instant – with new solutions and decisions needed immediately. However, with the right project team these moments feel more exciting and a challenge to be solved rather than finding them to be insurmountable problems.

 

Squeezing into the Tower of London

Squeezing into the Tower of London

On day three of the build a clear blue sky greeted the delivery of the crane – an excellent situation as snow or high winds would have meant potential schedule delays. The crane lorry squeezed its way under the Tower’s historic archways and over bridges to take up residence, allowing the removal of the old exhibition material and lift in of new build items.

Craning items in and out

Carefully craning items in and out

By day four it was apparent that the existing showcases had originally been screwed very firmly to the floor and each supporting foot had to be located and unscrewed before they could be moved to their new positions. However, as move after move took place and with a van and 2 builders skips of old material left the site, it was clear that a new exhibition was beginning to take shape.

As the first week drew to a close not only had all the cases been repositioned, they had also received a complete internal fit-out and one of our new cases was also finished. Everything was ready for graphic installation – and then objects…

More images of the installation at the Tower of London can be found on our Flickr page.