Henry VIII was well-known for his interest in technological innovation when it came to armour and weaponry, whether it was for personal use or for equipping his army. The sixteen gun shields which survive in the collections of the Royal Armouries are a prime example of his fascination with new or unusual developments. These shields formed part of a group of thirty-five such contraptions listed in the inventory made of Henry’s armoury after his death in 1547, which recorded them as ‘targets steilde wt gonnes’. They are thought to have been produced for the King by Giovanbattista of Ravenna around 1544. He may have supplied them complete, or possibly just the shields, in which case they would then have been fitted with guns in England.
All the surviving shields are of similar form. They are circular, measure approximately 50cm in diameter, and are fitted with breech-loading matchlock firearms which protrude either from the centre of the convex face, or slightly above the centre point. In most of the shields with centrally mounted guns, there is a small aperture covered by a grill, which must have been used for sighting and aiming. The main shield bodies were constructed from two layers of thin strips of wood, possibly oak, ash or elm. The bases were then edged and faced with iron or steel plates. Some of the shields have the remains of textile linings, which seem to have been woollen cloth covering a layer of tow or hemp fibre which acted as padding for the arm holding the shield. Leather straps provided attachments for the arm, and the guns were braced with an iron bracket.
A further inventory of the armoury in 1676 shows that over time, the number of gun shields had increased to sixty-six. To have been present in such numbers, they seem to have had some credibility as military weapons, even if this was short-lived. This theory is supported by the recovery of fragments of gun shields from the wreck of the Mary Rose, because it is unlikely that they would have been on board if they were not considered potentially useful for offensive and defensive purposes. There has been speculation that their presence on the Mary Rose meant that they were specifically intended for naval use. However, it seems more likely that they had been packed to be transported as part of the royal arsenal, because they were placed in storage in the ship’s orlop deck rather than positioned for immediate use as part of the ship’s armament.
These gun shields never experienced widespread usage. This was probably due to their unwieldy nature and the risk of injury to the face, eyes and hands from the blast of combustion gases when the guns were fired. However, the shields are of exceptional interest today because they provide an early example of breech-loading firearms which used pre-loaded iron cartridges tapered to match the taper of the breech of the gun. Firearms were becoming increasingly versatile in the sixteenth century, and gun shields provide an important indication of this.
Blogger: Natasha Roberts, Curatorial Assistant
Latest posts by Royal Armouries (see all)
- Facing-Recovering at Fort Nelson - 16 January 2015
- The Royal Armouries Leather In Warfare Conference - 11 December 2014
- They That Are Left: the Royal Armouries hosts a stunning Remembrance photographic exhibition - 18 November 2014