H&H Sculptors Ltd are creating conservation grade figures for the Line of Kings that will support the armours to be mounted on original carved wooden horses. Their work is in the tradition of the craftsmen who have worked on this incredible display over hundreds of years.
Kathryn Hall of H&H takes us through the process of preparing the figures to provide a perfect fit.
Garry Hall, MD of H&H Sculptors, visited Chris Smith, Conservator at the Tower of London, on 19 April, with a selection of our assessment torsos and body parts taken from the measurements that Chris had supplied, which we felt would be most suited to the sizes of uniforms and armour. At this meeting, Chris and Garry tried the armour on a combination of different torsos shapes, and chose the best fitting ones for each of the three sets of armour, taking photos and making notes on each figure.
After this initial assessment process, we laid up all the relevant body parts in the studio using conservation-grade materials, adapting each figure and making the necessary alterations. We are now in a position to return with the three figures ‘tacked together’ and ready for their second fitting. At this stage, it may be necessary to make some minor adjustments before finally securing all the parts together and completing each figure for delivery on 7 June.
The story continues at the second fitting…
The main difficulties we found were to make sure that the figures would support the weight of the armour but without being too close or too tight, and not compromising the object in any way. We removed the figures’ elbows, which allowed us to slide the armour ‘sleeves’ carefully upwards to attach at the shoulders, and to use an alternative way of securing the arms to torso on the inside with a wing-nut fixing we had previously developed for the V&A.
We had prepared all three sets of legs to be spread outwards, so they can cope with sitting on horseback – but when they were placed on the saddle, which was poised on top of a stool in a ‘mocked-up’ riding position, we could see they needed to be even straighter legged.
However, once we tested them on the actual wooden horses, complete with saddle, it was again quite different.
We had to cut off the chin, from one of the heads, and take a slice from the back, as the helmet wouldn’t fit over it properly. It was a mystery as to why this should be until we realised the gorget sat much higher up the neck than on the previous figure, and was preventing the helmet from dropping down. So off came the chin!
The forearms needed shortening to allow for the original wooden hands to attach successfully, but apart from that they all fitted well. We needed to shave a little off the calves of one pair of legs so the leg armour wasn’t quite so snug a fit.
During June, the figures and armours will be carefully installed together in the final stages of preparing the new exhibition of the Line of Kings which opens on 10 July.
Blogger: Kathryn Hall, H&H Sculptors Ltd